Are You a Process Engineering Pro?

Test your knowledge of core concepts like P&IDs, pump hydraulics, compressor control, and chemical process engineering activities with this introductory quiz.

1 / 15

What is the maximum velocity of a liquid in a pipe from erosion point of view based on API requirements?

2 / 15

Multi stage compressors are used to

3 / 15

Through the pump system curve, what can we get at a specific flow rate?

4 / 15

In a process flow diagram, we typically show

5 / 15

Which type of 2 phase flow in a pipe should be avoided?

6 / 15

Anti-surge control is used in

7 / 15

When protecting our system from overpressure, which one of these is not considered as equipment protection in HAZOP?

8 / 15

A reboiler is located at an elevation

9 / 15

The pressure safety valve outlet line should be sloped towards

10 / 15

Blanketing is commonly used in

11 / 15

When the pressure inside the control valve drops to below vapor pressure, then after exiting the valve it gets restored to more than vapor pressure, this is called

12 / 15

Removable spool is not commonly used for

13 / 15

When emptying a vessel containing hydrocarbons, where do we send the hydrocarbon liquid inside the vessel?

14 / 15

In case we don't have available instrument devices with the proper SIL rating, what can we do so that our safety instrumented function reaches the required SIL rating?

15 / 15

We should add a pressure safety valve on a centrifugal pump discharge to protect the discharge system from overpressure.

Your score is

The average score is 56%

0%